Waveform
EDM typical envelope
EQ Profile
Kick Punch (80–100 Hz) & High-End Impact (8–12 kHz)
LUFS Target
TikTok integrated
Spectrum
Pink-noise reference
EDM Mastering for TikTok
Maximum loudness, kick clarity, sub-bass control, impact · Tuned for TikTok playback
Target: -14 LUFS · True Peak: -1 dBTP · Dynamic Range: 4-8 LU
EDM Mastering Specification. TikTok
| Parameter | EDM Specification |
|---|---|
| Loudness Target | -14 LUFS integrated (TikTok optimized) |
| True Peak Ceiling | -1 dBTP. Inter-sample peak limit |
| Dynamic Range | 4-8 LU LU. Genre-appropriate |
| EQ Focus | Kick Punch (80–100 Hz) & High-End Impact (8–12 kHz) |
| Stereo Image | Mono sub below 100 Hz, ultra-wide stereo above 200 Hz |
| Platform Algorithm | TikTok normalizes audio and plays through phone speakers. |
Why EDM on TikTok Needs Specialized Mastering
EDM mastering is the genre most frequently destroyed by streaming normalization misunderstanding. Producers targeting -8 LUFS believe they're competing louder. On Spotify they're simply turned down by 6 dB, sacrificing 6 dB of dynamic range for zero advantage. The -14 LUFS target preserves EDM's sidechain kick-bass relationship so the kick's transient attack at 80–100 Hz retains full impact. Brick-wall limiting for EDM requires careful true peak management. AAC encoding at the streaming stage adds 1–2 dB of inter-sample distortion unless the limiter's true peak ceiling is set at -1 dBTP. The drop section's stereo width must be managed to prevent phase cancellation on mono club systems. A high-pass filter on the Haas effect reverb above 300 Hz keeps sub-bass mono while upper-mid elements remain wide. Build sections and drops should have different dynamic range characteristics: allow 2–3 dB more dynamics in builds to increase the perceived impact of the drop. The sidechain compression that defines EDM's signature pumping. Typically 4:1, 1 ms attack, 100–200 ms release. Must survive the mastering chain's gain reduction without softening the kick's triggering transient.
TikTok context: TikTok normalizes audio and plays through phone speakers. Prioritize mid-range clarity and strong transients over sub-bass. Your track must cut through with earbuds and tiny speakers.
EDM × TikTok. The Normalization Math
How -14 LUFS interacts with EDM's natural loudness window
EDM's natural -8 to -6 LUFS loudness sits roughly 7.0 dB hotter than TikTok's -14 LUFS target, so the platform turns the master down at playback. The competitive instinct to push to -7 or -8 LUFS for "loudness wars" parity is wasted on TikTok. the platform takes the gain back, and the only result is the dynamic compression you paid for with no perceived loudness benefit. Target -14 LUFS integrated directly and bank the saved dynamic range as loud and dense. The -1 dBTP ceiling specified for TikTok prevents inter-sample peaks from clipping during the codec's reconstruction filter, which is especially relevant for EDM's 30-80 Hz sub-bass content where high-amplitude transients accumulate against the limiter.
Codec Reality for EDM on TikTok
TikTok encodes at 128 kbps (with loudness pre-processing) and plays primarily through phone speakers and earbuds in unpredictable noise environments. the listener's playback chain destroys content below 60 Hz and rolls off above 12 kHz before your master ever reaches their ear. EDM's 30-80 Hz sub-bass and 10-15 kHz top-end sparkle content needs to translate at 2-4 kHz midrange where phone speakers live or it disappears from the playback. Harmonic-exciter saturation that re-creates fundamentals as upper harmonics is more useful than EQ boosts on this platform: phone speakers can reproduce harmonics that they cannot reproduce as fundamentals. The dynamic-range character of EDM (loud and dense, 4-8 LU) interacts with this codec tier specifically: compress conservatively, then let the codec do the rest. Over-compression at the mastering stage stacks with the codec's loudness handling and produces a flat, fatigued listening result.
EDM EQ Profile for TikTok
Kick: High-pass sub below 30 Hz. Boost 60–80 Hz for kick body, cut 200–300 Hz for punch.
Sub-bass: Mono everything below 80 Hz. Boost 40–60 Hz for sub impact. Tune sub to key.
Synths: Cut 300–500 Hz ('boxiness') from pads. Boost 2–5 kHz for lead synth presence.
Stereo width: Wide stereo at 500 Hz+ for the massive club sound. Keep low-end mono.
Compression & Limiting for TikTok
Limiting: EDM can push hard. 4–8 LU dynamic range for maximum energy on the dancefloor.
Sidechain: Preserve the kick-sidechain ducking effect. It drives the EDM groove and must survive mastering.
Clip gain: Some EDM mastering engineers clip slightly before the limiter for additional density. Use sparingly.
EDM LUFS Targets. All Platforms Compared
How EDM mastering specs differ across every major streaming platform.
| Platform | Integrated LUFS | True Peak | Current page |
|---|---|---|---|
| -14 LUFS | -1 dBTP | View guide → | |
| -16 LUFS | -1 dBTP | View guide → | |
▶️YouTube | -14 LUFS | -1 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -11 LUFS | -0.5 dBTP | View guide → | |
🎵TikTok | -14 LUFS | -1 dBTP | You are here |
| -13 LUFS | -0.5 dBTP | View guide → | |
🎛️Beatport | -9 LUFS | -0.3 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -15 LUFS | -1 dBTP | View guide → |
Technical Methodology. EDM Mastering for TikTok
Target: -14 LUFS integrated · -1 dBTP true peak · EBU R128 / ITU-R BS.1770-4 compliant
We measure integrated LUFS using K-weighted filtering per ITU-R BS.1770-4: a high-shelf pre-filter at 1681.97 Hz (+3.9998 dB gain) followed by a 75 Hz high-pass (Q=0.5) to remove DC offset and low-frequency rumble. The mean square of the filtered signal gives us integrated loudness in LUFS.
True peak (dBTP) is measured at 4× oversampling to detect inter-sample peaks that occur between digital samples. Sample-peak measurement alone misses these peaks, which cause audible clipping during AAC and MP3 lossy encoding on streaming platforms. We enforce the true peak ceiling at -1 dBTP for all standard platforms.
Genre EQ profiles apply frequency-specific gain based on each genre's sonic characteristics: mud reduction at 250–400 Hz for hip-hop and trap, presence enhancement at 2–4 kHz for vocal clarity on phone speakers, sub-bass high-pass at 30–35 Hz for all genres to remove inaudible subsonic content that wastes headroom.
Master bus compression uses a VCA-style algorithm with genre-tuned attack and release times. Lo-fi and jazz use 50 ms attack to preserve transients; EDM and techno use 5–10 ms for density. Parallel compression blends the compressed signal at 20–40% wet to lift room sound without eliminating the uncompressed transient attack.
The final limiter stage uses lookahead limiting (3–5 ms) to catch transient peaks before they exceed the true peak ceiling. The limiter targets platform-specific LUFS: -14 LUFS for Spotify, -16 LUFS for Apple Music, -11 LUFS for SoundCloud, -9 LUFS for Beatport. Gain reduction is transparent at 1–2 dB of limiting; beyond 3 dB audible artifacts require reducing the input drive.
All processing runs in your browser via Web Audio API. No audio data is uploaded to any server.
EDM Mastering FAQ. TikTok
What LUFS for EDM on TikTok?
-14 LUFS integrated with true peak -1 dBTP. EDM can be mastered aggressively to this target. 4-8 LU dynamic range is normal for dance music.
How do I keep the kick punching through on streaming?
Boost 60–80 Hz for kick body and 2–4 kHz for kick click/attack. Use a transient shaper to preserve the attack. Multiband compression keeps the sub-bass controlled while the kick punches through.
Will my EDM track lose energy on TikTok at -14 LUFS?
No. At -14 LUFS, TikTok plays every track at the same loudness. A well-mastered EDM track at -14 LUFS with preserved dynamics sounds MORE energetic than an over-limited version at -8 LUFS that gets turned down to the same level.
EDM Mastering for Other Platforms
Other Genres on TikTok
Upload a track to
instantly master
Choose a file or drag it here
Supports WAV · FLAC · MP3 · M4A · AIFF