Waveform
Rock typical envelope
EQ Profile
Guitar Presence (2–4 kHz) & Kick Body (60–80 Hz)
LUFS Target
TikTok integrated
Spectrum
Pink-noise reference
Rock Mastering for TikTok
Guitar presence, drum punch, natural dynamics, energy · Tuned for TikTok playback
Target: -14 LUFS · True Peak: -1 dBTP · Dynamic Range: 8-12 LU
Rock Mastering Specification. TikTok
| Parameter | Rock Specification |
|---|---|
| Loudness Target | -14 LUFS integrated (TikTok optimized) |
| True Peak Ceiling | -1 dBTP. Inter-sample peak limit |
| Dynamic Range | 8-12 LU LU. Genre-appropriate |
| EQ Focus | Guitar Presence (2–4 kHz) & Kick Body (60–80 Hz) |
| Stereo Image | Wide guitar spread, mono kick and bass |
| Platform Algorithm | TikTok normalizes audio and plays through phone speakers. |
Why Rock on TikTok Needs Specialized Mastering
Rock mastering sits at the intersection of transient dynamics and perceived loudness. A tension that defined every loudness war debate since the 1990s. Guitar distortion is the loudest sustained signal in most rock mixes yet must not mask the snare crack at 2–4 kHz or kick drum body at 60–80 Hz. The classic mastering EQ move is a 300–500 Hz cut of 2–3 dB to reduce the boxy 'bedroom recording' resonance that accumulates from multiple guitar layers. Parallel compression is the genre's defining dynamic tool: compress aggressively at 8:1 with fast attack and medium release, blend at 30–40% wet. This lifts room sound and sustain without killing the snare transient. True peak limiting requires special attention with distorted guitars. Their harmonic content extends above 15 kHz, and inter-sample peaks from harmonic saturation will clip encoding algorithms even when sample peak reads -0.3 dBFS. Set true peak at -1 dBTP without exception. The guitar stereo spread (left-right double tracking) should remain wide throughout the mastering chain. Mono checking is essential to confirm guitars don't cancel in the 500 Hz–2 kHz range where they carry most of their energy.
TikTok context: TikTok normalizes audio and plays through phone speakers. Prioritize mid-range clarity and strong transients over sub-bass. Your track must cut through with earbuds and tiny speakers.
Rock × TikTok. The Normalization Math
How -14 LUFS interacts with Rock's natural loudness window
Rock's natural -11 to -9 LUFS loudness sits roughly 4.0 dB hotter than TikTok's -14 LUFS target, so the platform turns the master down at playback. The competitive instinct to push to -7 or -8 LUFS for "loudness wars" parity is wasted on TikTok. the platform takes the gain back, and the only result is the dynamic compression you paid for with no perceived loudness benefit. Target -14 LUFS integrated directly and bank the saved dynamic range as punchy with room for crescendo. The -1 dBTP ceiling specified for TikTok prevents inter-sample peaks from clipping during the codec's reconstruction filter, which is especially relevant for Rock's 100-200 Hz guitar body content where high-amplitude transients accumulate against the limiter.
Codec Reality for Rock on TikTok
TikTok encodes at 128 kbps (with loudness pre-processing) and plays primarily through phone speakers and earbuds in unpredictable noise environments. the listener's playback chain destroys content below 60 Hz and rolls off above 12 kHz before your master ever reaches their ear. Rock's 100-200 Hz guitar body and 2-5 kHz attack content needs to translate at 2-4 kHz midrange where phone speakers live or it disappears from the playback. Harmonic-exciter saturation that re-creates fundamentals as upper harmonics is more useful than EQ boosts on this platform: phone speakers can reproduce harmonics that they cannot reproduce as fundamentals. The dynamic-range character of Rock (punchy with room for crescendo, 8-11 LU) interacts with this codec tier specifically: compress conservatively, then let the codec do the rest. Over-compression at the mastering stage stacks with the codec's loudness handling and produces a flat, fatigued listening result.
Rock EQ Profile for TikTok
Guitar presence: Boost 2–5 kHz for electric guitar attack and cut through the mix.
Drum punch: Boost 60–80 Hz for kick drum thump, 200 Hz for snare body, 10 kHz for cymbal air.
Low-mid cut: Cut 250–400 Hz to reduce boxy resonance from guitar cabinets and drums.
Stereo balance: Check mono compatibility. Guitar panning should collapse well for phone speakers.
Compression & Limiting for TikTok
Character compression: Rock tolerates moderate-heavy compression for energy and attitude. 4:1 ratio, medium attack.
Brick-wall limiting: Rock hits hard at target LUFS. 7-10 LU dynamic range is competitive.
Transient preservation: Keep snare and kick attack sharp. Use a limiter with good transient response.
Rock LUFS Targets. All Platforms Compared
How Rock mastering specs differ across every major streaming platform.
| Platform | Integrated LUFS | True Peak | Current page |
|---|---|---|---|
| -14 LUFS | -1 dBTP | View guide → | |
| -16 LUFS | -1 dBTP | View guide → | |
▶️YouTube | -14 LUFS | -1 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -11 LUFS | -0.5 dBTP | View guide → | |
🎵TikTok | -14 LUFS | -1 dBTP | You are here |
| -13 LUFS | -0.5 dBTP | View guide → | |
🎛️Beatport | -9 LUFS | -0.3 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -15 LUFS | -1 dBTP | View guide → |
Technical Methodology. Rock Mastering for TikTok
Target: -14 LUFS integrated · -1 dBTP true peak · EBU R128 / ITU-R BS.1770-4 compliant
We measure integrated LUFS using K-weighted filtering per ITU-R BS.1770-4: a high-shelf pre-filter at 1681.97 Hz (+3.9998 dB gain) followed by a 75 Hz high-pass (Q=0.5) to remove DC offset and low-frequency rumble. The mean square of the filtered signal gives us integrated loudness in LUFS.
True peak (dBTP) is measured at 4× oversampling to detect inter-sample peaks that occur between digital samples. Sample-peak measurement alone misses these peaks, which cause audible clipping during AAC and MP3 lossy encoding on streaming platforms. We enforce the true peak ceiling at -1 dBTP for all standard platforms.
Genre EQ profiles apply frequency-specific gain based on each genre's sonic characteristics: mud reduction at 250–400 Hz for hip-hop and trap, presence enhancement at 2–4 kHz for vocal clarity on phone speakers, sub-bass high-pass at 30–35 Hz for all genres to remove inaudible subsonic content that wastes headroom.
Master bus compression uses a VCA-style algorithm with genre-tuned attack and release times. Lo-fi and jazz use 50 ms attack to preserve transients; EDM and techno use 5–10 ms for density. Parallel compression blends the compressed signal at 20–40% wet to lift room sound without eliminating the uncompressed transient attack.
The final limiter stage uses lookahead limiting (3–5 ms) to catch transient peaks before they exceed the true peak ceiling. The limiter targets platform-specific LUFS: -14 LUFS for Spotify, -16 LUFS for Apple Music, -11 LUFS for SoundCloud, -9 LUFS for Beatport. Gain reduction is transparent at 1–2 dB of limiting; beyond 3 dB audible artifacts require reducing the input drive.
All processing runs in your browser via Web Audio API. No audio data is uploaded to any server.
Rock Mastering FAQ. TikTok
What LUFS for rock on TikTok?
-14 LUFS integrated, true peak -1 dBTP. Rock is typically mastered at 7–10 LU dynamic range. Loud enough to compete but retaining the energy and transient punch that defines the genre.
How do I get guitars to cut through in the master?
Boost 2–5 kHz on the master bus. Also check that guitar and vocals are occupying slightly different frequency slots. Cut 1–3 kHz slightly on guitars if they conflict with lead vocals.
Will rock dynamics survive TikTok's normalization?
Yes. TikTok's normalization at -14 LUFS levels the playback volume, not the dynamics. A 7-10 LU dynamic range rock master will retain its peaks and energy at normalized playback.
Rock Mastering for Other Platforms
Other Genres on TikTok
Upload a track to
instantly master
Choose a file or drag it here
Supports WAV · FLAC · MP3 · M4A · AIFF