Waveform
Afrobeats typical envelope
EQ Profile
Percussion Mid (500 Hz–2 kHz) & Bass Groove (80–150 Hz)
LUFS Target
TikTok integrated
Spectrum
Pink-noise reference
Afrobeats Mastering for TikTok
Danceable percussion, vocal energy, warm bass groove · Tuned for TikTok playback
Target: -14 LUFS · True Peak: -1 dBTP · Dynamic Range: 8-12 LU
Afrobeats Mastering Specification. TikTok
| Parameter | Afrobeats Specification |
|---|---|
| Loudness Target | -14 LUFS integrated (TikTok optimized) |
| True Peak Ceiling | -1 dBTP. Inter-sample peak limit |
| Dynamic Range | 8-12 LU LU. Genre-appropriate |
| EQ Focus | Percussion Mid (500 Hz–2 kHz) & Bass Groove (80–150 Hz) |
| Stereo Image | Wide percussive stereo, mono sub-bass |
| Platform Algorithm | TikTok normalizes audio and plays through phone speakers. |
Why Afrobeats on TikTok Needs Specialized Mastering
Afrobeats mastering centers on the relationship between Afropercussion patterns and sub-bass groove. A combination that demands specific low-frequency management. Talking drum and shekere create mid-range rhythmic content at 500 Hz–2 kHz that competes with the lead vocal's presence zone. A 1–2 dB dynamic reduction at 800 Hz, triggered by percussion transients, reduces masking without dulling the drum character. The bass guitar and electronic bass in Afrobeats typically sits at 80–150 Hz. Tighter and more melodic than EDM's 50–80 Hz sub-bass. This means a lower high-pass filter at 20–30 Hz works without losing bass warmth. Afrobeats productions intended for club playback require careful stereo width management. A wide mix on headphones may collapse to mono on club systems with large-format speakers. M/S processing to ensure sub-bass below 80 Hz is phase-coherent in mono is essential. The vocal energy in Afrobeats is typically at 1–4 kHz. A gentle boost at 2.5 kHz brings the vocal forward on earbuds without harshness. Compression should be warm and musical rather than aggressive. 3:1 ratio, 20 ms attack, 100 ms release on the master bus preserves the groove's natural breathe.
TikTok context: TikTok normalizes audio and plays through phone speakers. Prioritize mid-range clarity and strong transients over sub-bass. Your track must cut through with earbuds and tiny speakers.
Afrobeats × TikTok. The Normalization Math
How -14 LUFS interacts with Afrobeats's natural loudness window
Afrobeats's natural -10 to -8 LUFS loudness sits roughly 5.0 dB hotter than TikTok's -14 LUFS target, so the platform turns the master down at playback. The competitive instinct to push to -7 or -8 LUFS for "loudness wars" parity is wasted on TikTok. the platform takes the gain back, and the only result is the dynamic compression you paid for with no perceived loudness benefit. Target -14 LUFS integrated directly and bank the saved dynamic range as groove-forward with controlled punch. The -1 dBTP ceiling specified for TikTok prevents inter-sample peaks from clipping during the codec's reconstruction filter, which is especially relevant for Afrobeats's 60-120 Hz log-drum content where high-amplitude transients accumulate against the limiter.
Codec Reality for Afrobeats on TikTok
TikTok encodes at 128 kbps (with loudness pre-processing) and plays primarily through phone speakers and earbuds in unpredictable noise environments. the listener's playback chain destroys content below 60 Hz and rolls off above 12 kHz before your master ever reaches their ear. Afrobeats's 60-120 Hz log-drum and 2-4 kHz vocal lift content needs to translate at 2-4 kHz midrange where phone speakers live or it disappears from the playback. Harmonic-exciter saturation that re-creates fundamentals as upper harmonics is more useful than EQ boosts on this platform: phone speakers can reproduce harmonics that they cannot reproduce as fundamentals. The dynamic-range character of Afrobeats (groove-forward with controlled punch, 8-10 LU) interacts with this codec tier specifically: compress conservatively, then let the codec do the rest. Over-compression at the mastering stage stacks with the codec's loudness handling and produces a flat, fatigued listening result.
Afrobeats EQ Profile for TikTok
Percussion clarity: Boost 2–4 kHz for talking drum and percussion attack. Afrobeats percussion must be sharp and rhythmically defined above the dense mix.
Vocal presence: Boost 3–5 kHz by 1.5–2 dB for lead vocal intelligibility. Afrobeats vocals are the emotional core and must sit forward in the mix.
Bass groove: Keep 80–150 Hz full for the melodic bass groove. High-pass below 30 Hz only. Afrobeats needs bass warmth, not rumble removal.
Phone translation: Boost 1–3 kHz aggressively for the groove to translate on phone speakers. Sub-bass below 60 Hz is lost on mobile.
Compression & Limiting for TikTok
Rhythmic glue: 2–3 dB of master bus glue compression with slow attack (30ms) to preserve the percussion transients that drive the groove.
Platform consistency: Target -14 LUFS integrated. Afrobeats at a consistent loudness allows the groove to drive rather than volume dynamics.
Vocal dynamic control: Multiband compression in the 1–5 kHz vocal range controls peaks without squashing the energy and expressiveness of the performance.
Afrobeats LUFS Targets. All Platforms Compared
How Afrobeats mastering specs differ across every major streaming platform.
| Platform | Integrated LUFS | True Peak | Current page |
|---|---|---|---|
| -14 LUFS | -1 dBTP | View guide → | |
| -16 LUFS | -1 dBTP | View guide → | |
▶️YouTube | -14 LUFS | -1 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -11 LUFS | -0.5 dBTP | View guide → | |
🎵TikTok | -14 LUFS | -1 dBTP | You are here |
| -13 LUFS | -0.5 dBTP | View guide → | |
🎛️Beatport | -9 LUFS | -0.3 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -15 LUFS | -1 dBTP | View guide → |
Technical Methodology. Afrobeats Mastering for TikTok
Target: -14 LUFS integrated · -1 dBTP true peak · EBU R128 / ITU-R BS.1770-4 compliant
We measure integrated LUFS using K-weighted filtering per ITU-R BS.1770-4: a high-shelf pre-filter at 1681.97 Hz (+3.9998 dB gain) followed by a 75 Hz high-pass (Q=0.5) to remove DC offset and low-frequency rumble. The mean square of the filtered signal gives us integrated loudness in LUFS.
True peak (dBTP) is measured at 4× oversampling to detect inter-sample peaks that occur between digital samples. Sample-peak measurement alone misses these peaks, which cause audible clipping during AAC and MP3 lossy encoding on streaming platforms. We enforce the true peak ceiling at -1 dBTP for all standard platforms.
Genre EQ profiles apply frequency-specific gain based on each genre's sonic characteristics: mud reduction at 250–400 Hz for hip-hop and trap, presence enhancement at 2–4 kHz for vocal clarity on phone speakers, sub-bass high-pass at 30–35 Hz for all genres to remove inaudible subsonic content that wastes headroom.
Master bus compression uses a VCA-style algorithm with genre-tuned attack and release times. Lo-fi and jazz use 50 ms attack to preserve transients; EDM and techno use 5–10 ms for density. Parallel compression blends the compressed signal at 20–40% wet to lift room sound without eliminating the uncompressed transient attack.
The final limiter stage uses lookahead limiting (3–5 ms) to catch transient peaks before they exceed the true peak ceiling. The limiter targets platform-specific LUFS: -14 LUFS for Spotify, -16 LUFS for Apple Music, -11 LUFS for SoundCloud, -9 LUFS for Beatport. Gain reduction is transparent at 1–2 dB of limiting; beyond 3 dB audible artifacts require reducing the input drive.
All processing runs in your browser via Web Audio API. No audio data is uploaded to any server.
Afrobeats Mastering FAQ. TikTok
What LUFS for Afrobeats on TikTok?
Target -14 LUFS integrated on TikTok. Afrobeats benefits from an 8–12 LU dynamic range. Loud enough to compete but with the percussion transients preserved.
How do I make Afrobeats percussion cut through in the master?
Boost 2–4 kHz on the master bus for percussion attack. Also check that each percussion element (talking drum, shaker, snare) has its own frequency space. Gentle multiband compression in the 1–5 kHz range controls peaks without losing the rhythmic energy.
Does Afrobeats bass groove translate on TikTok?
Yes. But sub-bass below 60 Hz is lost on TikTok's phone speaker playback. Use a harmonic exciter on the bass to add upper harmonics (150–400 Hz) that translate on small speakers.
Afrobeats Mastering for Other Platforms
Other Genres on TikTok
Upload a track to
instantly master
Choose a file or drag it here
Supports WAV · FLAC · MP3 · M4A · AIFF