Waveform
Hyperpop typical envelope
EQ Profile
Distortion Character (all frequencies) & Digital Brightness (above 10 kHz)
LUFS Target
TikTok integrated
Spectrum
Pink-noise reference
Hyperpop Mastering for TikTok
Extreme compression, digital brightness, maximal sonics · Tuned for TikTok playback
Target: -14 LUFS · True Peak: -1 dBTP · Dynamic Range: 4-7 LU
Hyperpop Mastering Specification. TikTok
| Parameter | Hyperpop Specification |
|---|---|
| Loudness Target | -14 LUFS integrated (TikTok optimized) |
| True Peak Ceiling | -1 dBTP. Inter-sample peak limit |
| Dynamic Range | 4-7 LU LU. Genre-appropriate |
| EQ Focus | Distortion Character (all frequencies) & Digital Brightness (above 10 kHz) |
| Stereo Image | Extreme width, Haas delay. Mono-check mandatory |
| Platform Algorithm | TikTok normalizes audio and plays through phone speakers. |
Why Hyperpop on TikTok Needs Specialized Mastering
Hyperpop mastering intentionally deconstructs every standard mastering convention. The genre's digital distortion, clipping aesthetics, and maximum compression are features to enhance, not problems to solve. The core technical challenge is that hyperpop productions frequently exceed 0 dBFS in the mix stage, using soft clipper saturation as a creative tool. When these already-clipped signals go through a mastering limiter at -1 dBTP, the double-clipping creates harsh digital artifacts that were not intended. The solution: measure the actual peak level of the incoming mix after saturation, then apply sufficient gain reduction to bring the true peak to -1 dBTP as a single-stage process rather than compressing further into existing saturation. The high-frequency extension in hyperpop. Boosted above 12 kHz, often with harmonic saturation extending to 20 kHz. Causes inter-sample peaks during AAC encoding that are 2–3 dB above the sample peak reading. True peak monitoring and limiting at -1 dBTP is non-negotiable. The stereo width is frequently extreme, with Haas delay effects creating phase differences above 50% . Check mono compatibility carefully, as the genre's core audience listens on mono phone speakers. Dynamic range targets of 4–7 LU reflect the genre's maximal sonic identity.
TikTok context: TikTok normalizes audio and plays through phone speakers. Prioritize mid-range clarity and strong transients over sub-bass. Your track must cut through with earbuds and tiny speakers.
Hyperpop × TikTok. The Normalization Math
How -14 LUFS interacts with Hyperpop's natural loudness window
Hyperpop's natural -8 to -6 LUFS loudness sits roughly 7.0 dB hotter than TikTok's -14 LUFS target, so the platform turns the master down at playback. The competitive instinct to push to -7 or -8 LUFS for "loudness wars" parity is wasted on TikTok. the platform takes the gain back, and the only result is the dynamic compression you paid for with no perceived loudness benefit. Target -14 LUFS integrated directly and bank the saved dynamic range as intentionally clipped. The -1 dBTP ceiling specified for TikTok prevents inter-sample peaks from clipping during the codec's reconstruction filter, which is especially relevant for Hyperpop's 60 Hz sub-bass, blown-out 1-3 kHz, hyper 10-15 kHz content where high-amplitude transients accumulate against the limiter.
Codec Reality for Hyperpop on TikTok
TikTok encodes at 128 kbps (with loudness pre-processing) and plays primarily through phone speakers and earbuds in unpredictable noise environments. the listener's playback chain destroys content below 60 Hz and rolls off above 12 kHz before your master ever reaches their ear. Hyperpop's 60 Hz sub-bass, blown-out 1-3 kHz, hyper 10-15 kHz content needs to translate at 2-4 kHz midrange where phone speakers live or it disappears from the playback. Harmonic-exciter saturation that re-creates fundamentals as upper harmonics is more useful than EQ boosts on this platform: phone speakers can reproduce harmonics that they cannot reproduce as fundamentals. The dynamic-range character of Hyperpop (intentionally clipped, 4-7 LU) interacts with this codec tier specifically: compress conservatively, then let the codec do the rest. Over-compression at the mastering stage stacks with the codec's loudness handling and produces a flat, fatigued listening result.
Hyperpop EQ Profile for TikTok
Extreme high-end: Boost 8–12 kHz aggressively (3–5 dB) for the piercing digital brightness. Hyperpop intentionally sounds harsh and extreme. This is correct.
Distorted sub-bass: Heavy sub-bass distortion at 40–80 Hz. Allow intentional harmonic saturation for the blown-out low-end character of the genre.
Pitch-shifted vocals: Heavy pitch-shifted vocals dominate. Boost 4–8 kHz for the extreme high vocal presence and maintain the processed, artificial quality.
No warmth: High-pass aggressively at 60–80 Hz on most elements. Hyperpop avoids natural low-mid warmth. Keep the frequency picture sharp and extreme.
Compression & Limiting for TikTok
Maximum limiting: 3–6 LU dynamic range. Hyperpop is maximally compressed and distorted. This is aesthetically correct and intentional. Do not attempt to add dynamics.
Extreme sidechain: Sidechain pumping of 5–8 dB is more aggressive than any other genre. Verify the pump effect is exaggerated and audible in the master.
Clip distortion: Some hyperpop producers intentionally clip the master bus before limiting. If the distortion sounds intentional and correct for the track, it is correct.
Hyperpop LUFS Targets. All Platforms Compared
How Hyperpop mastering specs differ across every major streaming platform.
| Platform | Integrated LUFS | True Peak | Current page |
|---|---|---|---|
| -14 LUFS | -1 dBTP | View guide → | |
| -16 LUFS | -1 dBTP | View guide → | |
▶️YouTube | -14 LUFS | -1 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -11 LUFS | -0.5 dBTP | View guide → | |
🎵TikTok | -14 LUFS | -1 dBTP | You are here |
| -13 LUFS | -0.5 dBTP | View guide → | |
🎛️Beatport | -9 LUFS | -0.3 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -15 LUFS | -1 dBTP | View guide → |
Technical Methodology. Hyperpop Mastering for TikTok
Target: -14 LUFS integrated · -1 dBTP true peak · EBU R128 / ITU-R BS.1770-4 compliant
We measure integrated LUFS using K-weighted filtering per ITU-R BS.1770-4: a high-shelf pre-filter at 1681.97 Hz (+3.9998 dB gain) followed by a 75 Hz high-pass (Q=0.5) to remove DC offset and low-frequency rumble. The mean square of the filtered signal gives us integrated loudness in LUFS.
True peak (dBTP) is measured at 4× oversampling to detect inter-sample peaks that occur between digital samples. Sample-peak measurement alone misses these peaks, which cause audible clipping during AAC and MP3 lossy encoding on streaming platforms. We enforce the true peak ceiling at -1 dBTP for all standard platforms.
Genre EQ profiles apply frequency-specific gain based on each genre's sonic characteristics: mud reduction at 250–400 Hz for hip-hop and trap, presence enhancement at 2–4 kHz for vocal clarity on phone speakers, sub-bass high-pass at 30–35 Hz for all genres to remove inaudible subsonic content that wastes headroom.
Master bus compression uses a VCA-style algorithm with genre-tuned attack and release times. Lo-fi and jazz use 50 ms attack to preserve transients; EDM and techno use 5–10 ms for density. Parallel compression blends the compressed signal at 20–40% wet to lift room sound without eliminating the uncompressed transient attack.
The final limiter stage uses lookahead limiting (3–5 ms) to catch transient peaks before they exceed the true peak ceiling. The limiter targets platform-specific LUFS: -14 LUFS for Spotify, -16 LUFS for Apple Music, -11 LUFS for SoundCloud, -9 LUFS for Beatport. Gain reduction is transparent at 1–2 dB of limiting; beyond 3 dB audible artifacts require reducing the input drive.
All processing runs in your browser via Web Audio API. No audio data is uploaded to any server.
Hyperpop Mastering FAQ. TikTok
What LUFS for hyperpop on TikTok?
Target -14 LUFS integrated. Hyperpop benefits from a very narrow 3–6 LU dynamic range. The genre is maximally compressed. Loudness normalization on TikTok means going louder than the target only loses dynamics with no perceived benefit.
How do I master hyperpop without losing the intentional harshness?
The harshness IS the genre. Don't try to fix it. Boost 8–12 kHz, allow the high-end to be aggressive, and use a transparent limiter that doesn't round off the extreme transients. Heavy sidechain pumping of 5–8 dB should be audible and exaggerated. The goal is controlled chaos.
Does hyperpop's extreme high-end survive TikTok's compression?
Generally yes. The 8–12 kHz harshness survives streaming compression on TikTok. The frequencies are strong enough to survive AAC/OGG encoding.
Hyperpop Mastering for Other Platforms
Other Genres on TikTok
Upload a track to
instantly master
Choose a file or drag it here
Supports WAV · FLAC · MP3 · M4A · AIFF