MixMasterAIHip-Hop Mastering for Audiomack
Target: -13 LUFS · True Peak: -0.5 dBTP · Dynamic Range: 7-10 LU
No signup · WAV + MP3 · -13 LUFS auto-applied
Hip-Hop Mastering Specification — Audiomack
| Parameter | Hip-Hop Specification |
|---|---|
| Loudness Target | -13 LUFS integrated (Audiomack optimized) |
| True Peak Ceiling | -0.5 dBTP — inter-sample peak limit |
| Dynamic Range | 7-10 LU LU — genre-appropriate |
| EQ Focus | 808 Body (60–80 Hz) & Vocal Presence (2–4 kHz) |
| Stereo Image | Mono sub below 80 Hz, moderate stereo width |
| Platform Algorithm | Audiomack normalizes to approximately -13 LUFS and is the leading streaming platform for hip-hop, Afrobeats, and Afropop in Africa and the diaspora. |
Why Hip-Hop on Audiomack Needs Specialized Mastering
Hip-hop mastering lives and dies by the 808. The relationship between kick transient and sub-bass sustain is the genre's defining technical challenge — too much low-end at 60–80 Hz drowns the kick in mud; too little loses the mix's visceral punch. Modern hip-hop productions routinely target -8 LUFS before streaming normalization turns them down, sacrificing dynamic range for zero loudness gain. The correct mastering target preserves the kick's transient attack by keeping a fast-attack limiter above 2 ms. Sidechain compression between kick and 808 is handled at the mix stage, but the mastering chain must ensure this inter-sidechain relationship survives the true peak limiter at -1 dBTP without 808 clipping. Presence peaks at 2–4 kHz determine vocal intelligibility on phone speakers — the primary listening environment for 78% of hip-hop streams. High-frequency content above 12 kHz has diminishing returns: AAC and MP3 encoding attenuates it regardless, making extreme air-band boosts wasteful. A 250–350 Hz cut of 2–3 dB removes muddiness and creates space for the 808 to breathe without touching the kick's fundamental.
Audiomack context: Audiomack normalizes to approximately -13 LUFS and is the leading streaming platform for hip-hop, Afrobeats, and Afropop in Africa and the diaspora. Tracks stream on a wide range of devices including budget Android phones — prioritize sub-bass clarity and mid-range punch that translates on smaller speakers.
Hip-Hop EQ Profile for Audiomack
Low-end: Tight high-pass at 30–40 Hz to remove rumble. Keep 60–80 Hz full for kick body.
Mid-low: Small 2–3 dB cut at 250–350 Hz to reduce muddiness and let the 808 breathe.
Presence: Boost 2–4 kHz by 1–2 dB for vocal intelligibility on phone speakers.
High-end: Gentle 8 kHz shelf boost (+1 dB) for air without harshness.
Compression & Limiting for Audiomack
Master bus: Gentle 2–3 dB of glue compression (ratio 2:1, slow attack 30ms, fast release).
Limiting: Brick-wall at -1 dBTP. Push integrated LUFS to target — hip-hop can tolerate moderate limiting.
Use True Peak limiting, not just sample peak — inter-sample peaks cause distortion on streaming.
Hip-Hop LUFS Targets — All Platforms Compared
How Hip-Hop mastering specs differ across every major streaming platform.
| Platform | Integrated LUFS | True Peak | Current page |
|---|---|---|---|
| -14 LUFS | -1 dBTP | View guide → | |
| -16 LUFS | -1 dBTP | View guide → | |
▶️YouTube | -14 LUFS | -1 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -11 LUFS | -0.5 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
🎧Audiomack | -13 LUFS | -0.5 dBTP | You are here |
🎛️Beatport | -9 LUFS | -0.3 dBTP | View guide → |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -14 LUFS | -1 dBTP | View guide → | |
| -15 LUFS | -1 dBTP | View guide → |
Skip the manual settings
Apply these exact specs automatically.
-13 LUFS · -0.5 dBTP · Hip-Hop EQ — in 60 seconds. Free.
Master Free NowTechnical Methodology — Hip-Hop Mastering for Audiomack
Target: -13 LUFS integrated · -0.5 dBTP true peak · EBU R128 / ITU-R BS.1770-4 compliant
We measure integrated LUFS using K-weighted filtering per ITU-R BS.1770-4: a high-shelf pre-filter at 1681.97 Hz (+3.9998 dB gain) followed by a 75 Hz high-pass (Q=0.5) to remove DC offset and low-frequency rumble. The mean square of the filtered signal gives us integrated loudness in LUFS.
True peak (dBTP) is measured at 4× oversampling to detect inter-sample peaks that occur between digital samples. Sample-peak measurement alone misses these peaks, which cause audible clipping during AAC and MP3 lossy encoding on streaming platforms. We enforce the true peak ceiling at -1 dBTP for all standard platforms.
Genre EQ profiles apply frequency-specific gain based on each genre's sonic characteristics: mud reduction at 250–400 Hz for hip-hop and trap, presence enhancement at 2–4 kHz for vocal clarity on phone speakers, sub-bass high-pass at 30–35 Hz for all genres to remove inaudible subsonic content that wastes headroom.
Master bus compression uses a VCA-style algorithm with genre-tuned attack and release times. Lo-fi and jazz use 50 ms attack to preserve transients; EDM and techno use 5–10 ms for density. Parallel compression blends the compressed signal at 20–40% wet to lift room sound without eliminating the uncompressed transient attack.
The final limiter stage uses lookahead limiting (3–5 ms) to catch transient peaks before they exceed the true peak ceiling. The limiter targets platform-specific LUFS: -14 LUFS for Spotify, -16 LUFS for Apple Music, -11 LUFS for SoundCloud, -9 LUFS for Beatport. Gain reduction is transparent at 1–2 dB of limiting; beyond 3 dB audible artifacts require reducing the input drive.
All processing runs in your browser via Web Audio API — no audio data is uploaded to any server.
Hip-Hop Mastering FAQ — Audiomack
What LUFS should hip-hop be mastered to for Audiomack?
Master hip-hop to -13 LUFS integrated for Audiomack, with a true peak of -0.5 dBTP. Audiomack normalizes to approximately -13 LUFS and is the leading streaming platform for hip-hop, Afrobeats, and Afropop in Africa and the diaspora. Tracks stream on a wide range of devices including budget Android phones — prioritize sub-bass clarity and mid-range punch that translates on smaller speakers.
How do I get the 808 to punch through on Audiomack?
Keep 60–80 Hz full for 808 body, cut 250–350 Hz to reduce muddiness, and sidechain compress the kick and 808 together. On Audiomack, the full-range playback will reproduce sub-bass if your master is clean.
Should I master hip-hop loud or dynamic?
For Audiomack, target -13 LUFS. Going louder gets turned down automatically and only removes dynamics. Aim for 7–10 LU dynamic range for a punchy, competitive master.